Toshiba Automatic Washing Machine Repair in Al Jahra

The Al Jahra area is known for its practical lifestyle and the fast pace of daily household appliance usage. Toshiba automatic washing machines hold an essential place in every Kuwaiti home thanks to their high Japanese quality.
However, with frequent use, humidity, and dust, the washer might face sudden issues such as spin failure, weak drainage, or even control board malfunctions.
This is where the Toshiba washing machine repair technician in Al Jahra comes in—offering a professional on-site service inside the home that includes inspection, cleaning, reprogramming, and replacement of original parts from the Toshiba Kuwait Service Center.
The service is available 24 hours a day, using modern techniques and precise digital tools that guarantee fast and safe maintenance without needing to move the washer from its place.

Repairing Toshiba Washing Machines That Don’t Spin

When a Toshiba automatic washer stops spinning, it’s one of the most frustrating problems for housewives in Al Jahra, especially since the laundry comes out soaking wet and takes much longer to dry.
The issue might be as simple as a malfunction in the top lid or a bit more complex—such as a damaged motor or a faulty electronic board.
Here comes the role of the Toshiba washing machine repair technician in Al Jahra, who has extensive experience with spin-related problems and can diagnose and repair them accurately on-site without fully disassembling the washer.

Main Causes of Washer Spin Failure
• Worn or broken motor belt due to long use.
• Clogged drain pump preventing water from draining, causing the spin cycle to stop.
• Malfunctioning lid switch sensor, which stops the washer from spinning for safety reasons.
• Control board failure that prevents sending commands to the motor.
• Overloading the drum, which restricts proper spinning.
• Worn-out internal seal or calcium buildup inside the drum.

Symptoms of the Problem
• The washer suddenly stops before the spin cycle.
• Motor sound is heard, but the drum does not move.
• Water drains very slowly or not at all.
• Clothes remain wet after the wash program ends.
• Error codes such as E3, E5, or F1 appear on the display.

Inspection and Repair Steps Performed by Toshiba Al Jahra Technician

1.    Disconnect power and water from the washer.

2.    Run a quick diagnostic test using the Toshiba Spin Tester device.

3.    Check the motor and drive belt for slack or breakage.

4.    Remove and clean the drain filter from any debris or blockage.

5.    Measure electrical current from the control board to the motor.

6.    Inspect and replace the lid switch sensor if malfunctioning.

7.    Run a test cycle without clothes to confirm drum rotation.

8.    Reassemble all parts securely and run a full wash cycle in front of the customer.

Tools Used in Maintenance
• Toshiba Spin Diagnostic Device – to test spinning speed.
• Digital Clamp Meter – for accurate electrical current readings.
• Multifunction Tester – to check the electronic control board.
• Rubber Seal Kit – to replace the internal seal.
• Screw Set & Belt Tool – for fast belt replacement.

Service Features in Al Jahra
• Accurate inspection to identify the real cause of the issue.
• Use of modern digital diagnostic tools.
• Installation of genuine Toshiba parts with an official warranty.
• Repairs completed during the same visit.
• Operational guidance and maintenance tips provided after service.

Customer Experiences

“The washer completely stopped spinning. The technician from the Al Jahra center checked the belt and replaced it with an original part. Now it spins and washes like new.”
“Their service was fast, and we didn’t need to move the washer from home. The technicians were polite and professional.”

Toshiba Technician Tips to Avoid This Issue
• Don’t overload the washer beyond its capacity.
• Make sure the lid is fully closed before starting.
• Clean the drain filter every two weeks.
• Run an internal Drum Clean cycle once a month.
• Use detergent specifically made for automatic washers.
• Unplug the washer immediately if you hear an unusual sound during spinning.

Reasons Why the Service Is in High Demand in Al Jahra
• The hot climate that weakens the belt and rubber seal over time.
• Dust accumulation entering the internal openings.
• Daily intensive use, especially in large families.
• Lack of regular maintenance causing buildup in the drum.

Technical Aspect
Technicians at the Toshiba Al Jahra Service Center use Smart Diagnostic Software on tablets, which connect directly to the washer through a service port and display real-time data such as spin speed, motor power, and water level.
This method allows precise diagnosis without guesswork or unnecessary disassembly.

Marketing Aspect of the Service
The Toshiba Washer Spin Failure Repair Service in Al Jahra isn’t just a temporary fix—it’s a complete maintenance service that restores the washer to its original performance.
The customer benefits from a free full inspection, internal cleaning, and an official warranty on replaced parts—all at competitive prices with convenient in-home service.

Summary
If your Toshiba washer isn’t spinning or stops suddenly before finishing the program, don’t hesitate to contact a certified Toshiba technician in Al Jahra.
The service includes full diagnostics, belt, sensor, or control board replacement as needed, with genuine parts and guaranteed performance.
This way, your washer returns to working efficiently and lasts for many more years without trouble.

Fixing Noise and Vibration Problems During Operation

Loud noise or strong vibration during operation is one of the most common issues faced by Al Jahra residents, especially in houses with light floors or small apartments.
Toshiba automatic washers are known for their quiet operation, but when you start hearing knocking or excessive shaking, it’s a clear sign of a mechanical imbalance or an issue with load distribution inside the drum.
Certified technicians from the Toshiba Al Jahra Service Center have extensive experience identifying and permanently resolving noise or vibration issues—not just temporary fixes.

Possible Causes of Noise or Vibration
• Unbalanced load inside the washer.
• Damaged or loose bottom stabilizer mounts.
• Motor belt worn out or overtightened.
• Worn drum bearing.
• Detached drum shock absorber.
• Washer installed on an uneven surface.
• Small metal object stuck inside the drum.

Symptoms That Appear on the Washer
• Loud vibration sound during spinning.
• The washer moves from its place while operating.
• The drum shakes abnormally even with a small load.
• Burning smell or friction heat from the bottom area.
• Sudden washer stop due to activation of the vibration protection system.

Inspection and Repair Steps Followed by Toshiba Al Jahra Technician

1.    Disconnect power and start with an external drum inspection.

2.    Ensure the washer is level using a precise digital balance tool.

3.    Remove the back cover to inspect the belt and internal mounts.

4.    Examine the bearing for grinding or rough movement.

5.    Check the shock absorbers and replace any worn ones.

6.    Clean the drum from any metallic objects or coins.

7.    Install anti-vibration pads under the washer base.

8.    Run a high-speed test cycle to ensure stability.

Tools Used by the Technician
• Vibration Meter Pro – measures vibration intensity.
• Digital Level Tool – ensures proper leveling.
• Bearing Extractor Tool – allows fast bearing replacement.
• Shock Tester Device – checks internal spring performance.
• Anti-Vibration Pads – used to stabilize the washer on the floor.

Service Features in Al Jahra
• Thorough mechanical inspection of all rotating components.
• Installation of genuine Toshiba anti-vibration mounts.
• On-site professional repair without moving the washer.
• Free follow-up inspection to confirm total quietness.
• Official 6-month warranty on the service.

Customer Experiences

“Our washer used to move during spinning and make a loud noise. The technician from Al Jahra center installed anti-vibration pads and replaced the bearing. Now it’s completely quiet.”
“Excellent service! The technician inspected the washer within half an hour and fixed it without full disassembly.”

Toshiba Technician Tips to Prevent Noise Issues
• Never place the washer on a tilted floor.
• Distribute clothes evenly inside the drum.
• Check rubber feet regularly for wear.
• Avoid using maximum spin speed with heavy loads.
• Keep a small gap between the washer and the wall.

Reasons Why the Service Is in High Demand in Al Jahra
• Many homes have smooth ceramic floors causing stronger vibration.
• High temperature softens rubber bases over time.
• Dust buildup inside mounting bases affects balance.
• Daily intensive use without enough rest between cycles.

Technical Aspect of the Service
Technicians at the Toshiba Al Jahra center use a device called Toshiba Vibe Analyzer, which measures vibration frequency in hertz and compares readings to factory standards. Once maintenance is completed, the technician retests the washer and shows the new reading to the customer, confirming that the noise level is back to normal.

Marketing Benefit
The Toshiba Washer Noise and Vibration Treatment Service in Al Jahra isn’t just a sound repair—it’s an investment in home comfort and device longevity. The customer enjoys quiet, safe operation, reduced energy consumption, and extended washer life. That’s why customers prefer Toshiba Al Jahra technicians who rely on accurate diagnosis rather than temporary fixes.

Summary
The Toshiba washer noise and vibration repair service in Al Jahra ensures quiet, stable performance through full inspection of the motor and inner mounts, and replacement of worn parts with genuine components. Certified technicians from Toshiba Kuwait provide professional in-home maintenance, freeing you from noise issues and restoring your washer to smooth, silent operation like day one.

Control Board Maintenance and Electronic Reprogramming

The control board is the brain of the Toshiba automatic washer—it coordinates everything from water intake to spinning and drying. Any small fault can cause the washer to stop suddenly, display error codes, or run incorrect programs. In Al Jahra, because of heat and humidity, electronic issues occur more frequently, making specialized control board maintenance a necessity for households relying on their washer daily.

Signs of Control Board Malfunction
• Washer won’t turn on even though power is connected.
• Programs change automatically or stop midway.
• Display flickers or shows random symbols.
• Washer runs but doesn’t spin or draw water.
• Light burning smell from the upper section.

Causes of Control Board Damage
• Sudden power outage or voltage fluctuation.
• Moisture or steam entering the circuit board.
• Water leakage from the rear hose reaching the board.
• Dust buildup on the electronic components.
• Burnt resistors or capacitors inside the board.

Maintenance Steps Performed by Toshiba Al Jahra Technician

1.    Disconnect the washer completely from electricity.

2.    Remove the top cover to access the electronic board.

3.    Inspect internal circuits using a digital tester.

4.    Check the internal fuse and power supply stability.

5.    Clean the board with a moisture-resistant solution.

6.    Replace any burnt resistor or damaged transistor.

7.    Update system firmware using the Toshiba Programmer device.

8.    Run the washer and test full program response.

9.    Conduct a complete operational test for all commands.

Tools Used by the Technician
• Digital Multimeter Pro – checks voltage and current across the board.
• Micro Soldering Station – for precise circuit soldering.
• Toshiba Firmware Programmer – restores the original operating system.
• Static Wristband – protects components from static electricity.
• Thermo Sensor Device – monitors component temperature during use.

Service Features in Al Jahra
• Precision electronic repair without replacing the entire board.
• Firmware reprogramming instead of full replacement to save cost.
• Use of genuine Toshiba tools and materials.
• Complete internal cleaning of control components.
• Official 6-month warranty on the service.

Customer Experiences

“My washer used to shut off randomly. The technician from Al Jahra checked the board and reprogrammed it—it now runs perfectly.”
“Very professional service! The technician used a laptop-like device to reload the Toshiba firmware. My washer works like new again.”

Toshiba Technician Tips to Protect the Control Board
• Always use a voltage stabilizer to protect from fluctuations.
• Avoid using the washer during storms or high humidity.
• Don’t place metal objects or liquids on top of the washer.
• Unplug after finishing the wash cycle.
• Perform a control board check every 6 months.

Reasons Why the Service Is in High Demand in Al Jahra
• Frequent voltage fluctuations in some areas.
• Dust accumulation on home appliances.
• High temperatures affecting sensitive electronics.
• Continuous daily operation without rest cycles.

Technical Aspect of the Service
Technicians at the Toshiba Al Jahra Center use an advanced tool called Smart Board Analyzer, which connects to the control board and displays all connected circuits, temperatures, and potential faults. If a weak resistor or burnt circuit exists, the software highlights it immediately in color, making the process fast and extremely accurate.

Marketing Aspect of the Service
The Toshiba Control Board Maintenance and Reprogramming Service in Al Jahra is one of the most requested services because it restores the washer’s brain and original programming, making it operate exactly as it did when new. The customer benefits from precise diagnostics and only replaces the board if absolutely necessary, saving significant cost. This is why most Al Jahra residents prefer certified Toshiba technicians over unauthorized workshops.

Summary
The control board maintenance and reprogramming service for Toshiba washers in Al Jahra includes accurate electronic inspection, internal cleaning, firmware updates, and official warranty. Certified technicians from Toshiba Kuwait ensure safe, efficient washer performance that keeps serving your home with the legendary Japanese reliability Toshiba is known for.

Toshiba Automatic Washing Machine Repair in Jahra

Deep Cleaning Cycle and Internal Residue Removal

One of the most important maintenance services offered by Toshiba washing machine technicians in Al Jahra is the deep cleaning cycle service. Over time, washers accumulate detergent residue, fabric lint, limescale, and oils from daily laundry. These buildups can cause bad odors, poor performance, or even block water passages inside the drum. In Al Jahra, due to hard water containing high calcium levels, internal cleaning is not a luxury—it’s a necessity to maintain the washer’s life and performance.

Signs That the Washer Needs Deep Cleaning
• Unpleasant odor coming from the drum after washing.
• Clothes coming out with spots or lint residue.
• Weak water flow or slow drainage.
• Slight friction sound during drum rotation.
• Rust or dark stains appearing inside the drum.

Causes of Residue Buildup
• Using regular detergent instead of automatic washer powder.
• Frequent cold-water washes that fail to dissolve oils completely.
• Infrequent self-cleaning cycles.
• Hard water in Al Jahra rich in minerals.
• Keeping the washer door closed after washing, causing moisture and mold.

Cleaning Steps Performed by Toshiba Al Jahra Technician

1.    Disconnect power and water from the washer.

2.    Remove and manually clean the detergent drawer using a Toshiba-approved cleaning solution.

3.    Detach and clean the drain filter from dirt and residue.

4.    Use Toshiba Japan’s certified cleaner Drum Clean Pro.

5.    Run a special 60-minute high-temperature cleaning cycle.

6.    Wipe the drum interior with a soft sponge to remove any remaining residue.

7.    Check the back hose for limescale or clogs.

8.    Air-dry the drum and leave the door open for two hours after cleaning.

Service Features in Al Jahra
• Removes 99% of residue buildup.
• Full internal disinfection killing bacteria and fungi.
• Improves washing performance and reduces power use.
• Extends washer lifespan and prevents future faults.
• Complete home service with no need to move the washer.

Customer Experiences

“My washer smelled bad. After the deep cleaning service, it now smells fresh and clean again.”
“The technician used special Toshiba cleaning materials; the drum now shines and the wash quality improved noticeably.”

Toshiba Technician Tips to Keep the Washer Clean
• Run a self-clean cycle every two weeks.
• Use detergent designed for automatic washers.
• Keep the washer door open after each use to dry.
• Wipe the drum with a dry cloth after washing.
• Don’t leave wet laundry inside the washer for more than an hour.

Reasons Why the Service Is in High Demand in Al Jahra
• High calcium content in local water.
• Dust entering the external vents of the washer.
• Intensive daily use, especially in large families.
• Hot weather causing faster mold buildup in humid areas.

Technical Aspect of the Service
Certified technicians at the Toshiba Al Jahra Center use a device called Water Hardness Analyzer to measure calcium levels before and after cleaning. They also test water flow rate and drum rotation efficiency using the Spin Efficiency Tester to ensure the washer is performing at optimal levels after the service.

Marketing Aspect of the Service
The Toshiba Deep Cleaning Cycle Service in Al Jahra isn’t just cosmetic cleaning—it’s a full renewal for your washer. Customers benefit from a cleaner, more efficient machine, fresher laundry, and lower electricity consumption. The service is affordable compared to its benefits and is done the same day at home without inconvenience.

Summary
The deep cleaning cycle service for Toshiba washers in Al Jahra ensures effective removal of calcium and detergent residue, improved performance, and full internal disinfection. Certified technicians from Toshiba Kuwait Service Center deliver professional in-home service so you enjoy soft, clean, and fresh-scented laundry every time.

Lid Switch Sensor Inspection and Replacement When Needed

One component that many users overlook in Toshiba automatic washers is the Lid Switch Sensor. It’s a small but critical safety part that ensures the lid is properly closed before spinning or quick washing. This prevents any accidental movement during operation.
In Al Jahra, due to dust, humidity, and heavy daily use, this sensor can fail or disconnect—resulting in the washer not starting at all or stopping before the spin cycle.

Symptoms of a Faulty Lid Sensor
• Washer won’t start even with power connected.
• Sudden stop during washing or spinning.
• Error codes such as E2 or F5 appear.
• Drum doesn’t spin even though other functions work.
• Washer drains water but fails to spin.

Causes of Lid Sensor Damage
• Dust or humidity accumulation on the lid contact area.
• Broken lid latch that presses the sensor.
• Disconnected internal wires due to frequent vibrations.
• Electrical short circuit or voltage surge.
• Using cleaning sprays near electronic components.

Inspection and Repair Steps Performed by Toshiba Al Jahra Technician

1.    Disconnect power and water completely.

2.    Remove the top lid to access the sensor location.

3.    Check wire continuity using a Digital Multimeter.

4.    Verify electrical signal when the lid is closed.

5.    Clean the contact area using a moisture-resistant solution.

6.    Replace the sensor with a genuine Toshiba Japan part if faulty.

7.    Reinstall and secure the top lid.

8.    Run a test cycle to confirm correct sensor function.

Tools Used by the Technician
• Digital Multimeter Pro – measures voltage signal in the sensor.
• Mini Screwdriver Set – for careful lid removal.
• Toshiba Lid Sensor Kit – genuine replacement part.
• Contact Cleaner Spray – cleans and protects terminals.
• Diagnostic Tester – checks signal between sensor and control board.

Service Features in Al Jahra
• Fast inspection within minutes to find the cause of the problem.
• Installation of genuine Toshiba parts with warranty.
• Complete in-home service without moving the washer.
• Full system check after installation.
• Official 6-month warranty on part and service.

Customer Experiences

“The washer stopped after two minutes. The technician from Al Jahra replaced the lid sensor, and now it works perfectly.”
“Excellent and quick service! The technician cleaned the area and installed the new sensor professionally.”

Toshiba Technician Tips to Protect the Lid Sensor
• Don’t slam the washer lid after washing.
• Keep the lid contact area clean.
• Avoid using harsh chemicals near the hinges.
• If the washer stops suddenly, note the error code and call a technician instead of pressing buttons randomly.
• Schedule a top-section cleaning every six months.

Reasons Why the Service Is in High Demand in Al Jahra
• Dust and sand entering through ventilation openings.
• High humidity affecting sensor accuracy.
• Daily heavy use in large households.
• Repeated rough lid closing.

Technical Aspect of the Service
Technicians use a Smart Lid Analyzer, which tests the electrical signal between the sensor and control board with high precision. The device gives instant readings showing whether the sensor is functioning correctly or needs replacement, ensuring accurate, guess-free diagnostics.

Marketing Aspect of the Service
The Toshiba Lid Sensor Inspection Service in Al Jahra isn’t just a simple fix—it’s a safety and reliability guarantee for both the user and the machine. Certified technicians replace the part with an original Toshiba sensor and provide an official warranty—all done quickly at home for a reasonable price. The customer enjoys peace of mind and smooth washer operation without sudden stops.

Summary
The Lid Switch Sensor Inspection and Replacement Service for Toshiba washers in Al Jahra ensures safe and smooth washer operation using original parts with a full warranty. Certified technicians from Toshiba Kuwait Service Center perform precise, on-site maintenance that restores your washer’s reliability and safety.

Toshiba Al Jahra Service Center and 24/7 Emergency Maintenance

In Al Jahra, many households rely heavily on their washing machines, especially large families. With frequent use, it’s normal for sudden issues to occur—such as the washer not turning on, water leakage, or weak spinning. That’s where the Toshiba Al Jahra Maintenance Center stands out, providing 24-hour emergency service to meet customer needs quickly—even during holidays or late at night.
The service includes inspection, maintenance, replacement with original parts, and an official warranty—all performed right at your home without the need to move the washer.

Toshiba Al Jahra Service Center Features
• 24/7 emergency service across all Al Jahra areas.
• Certified Toshiba Kuwait technicians with 10+ years of experience.
• Advanced digital diagnostic tools for precise fault detection.
• Official written warranty on parts and services.
• Full in-home repair with no need to transport the machine.
• Post-service follow-up to monitor washer performance.

Common Issues Handled by the Center
• Washer won’t power on.
• Sudden stop during rinse or spin cycle.
• Knocking or vibration sounds.
• Water leakage from base or door.
• Error codes on display.
• Weak water drainage or overfilled drum.

Steps Followed by Toshiba Al Jahra Technicians

1.    Receive customer call and identify the problem.

2.    Dispatch the nearest specialist within 60 minutes max.

3.    Conduct full digital inspection using Toshiba Diagnostic Tool.

4.    Explain the issue and provide a price quote before work begins.

5.    Perform the repair or replace original parts immediately.

6.    Run a post-repair test to confirm issue resolution.

7.    Provide official warranty and a detailed service report.

Tools and Equipment Used by Technicians
• Toshiba Diagnostic Tablet – full electronic inspection.
• Water Pressure & Temperature Sensors – to test wash systems.
• Leak Detector Pro – detects any water leakage.
• Electric Load Analyzer – monitors power consumption.
• Smart Toolkit – ensures precise part installation without damage.

Areas Covered in Al Jahra
• Old and New Jahra.
• Al Oyoun – Al Qasr – Al Naseem.
• Al Waha – Tayma – Kazma.
• Al Naeem – Saad Al Abdullah.
• All new residential neighborhoods in the governorate.

Customer Experiences

“We called them at 11 p.m. because the washer stopped. Within 30 minutes, the technician arrived and fixed it on-site.”
“Very organized technicians—they inspected, replaced the belt, and repaired it the same day. Excellent service.”

Advantages of Choosing a Certified Toshiba Center
• 100% original factory parts.
• Technicians trained directly by Toshiba Japan.
• Detailed technical reports after every service.
• Continuous support through phone or WhatsApp.
• Transparent prices with no hidden fees.

Reasons Why the Service Is in High Demand in Al Jahra
• Heavy reliance on automatic washers in modern homes.
• Distance of some areas from traditional workshops.
• High demand for quick, in-home repair services.
• Public trust in officially certified Toshiba service.

Technical Aspect in the Service Center
All technicians use the Toshiba Smart Service System, directly linked to the company’s database in Kuwait. The software allows them to download the latest instructions for each washer model and diagnose issues accurately in record time, ensuring professional service with nearly zero error rate.

Marketing Aspect of the Service
The Toshiba Al Jahra Service Center offers more than just repairs—it provides a complete customer experience from the first call to post-service follow-up. Customers enjoy genuine quality, real warranties, and peace of mind. With rising competition, Toshiba Al Jahra remains the first choice for those seeking Japanese quality and Kuwaiti speed.

Summary
The Toshiba Al Jahra Service Center offers 24-hour emergency maintenance including digital inspection, on-site repair, and original part replacement with official warranty. Certified technicians provide complete, fast home service ensuring customer comfort and long-term washer efficiency.

Conclusion

When your Toshiba automatic washer faces any issue—whether sudden stoppage, loud noise, water leakage, or weak spinning—don’t attempt to repair it yourself, as most problems are internal and require precision tools and expertise.
The Toshiba Al Jahra Washer Repair Service gives you peace of mind and real warranty since all technicians are officially certified by Toshiba Kuwait, equipped with the latest diagnostic and programming tools. Every maintenance visit includes a free full inspection, internal cleaning, and genuine part replacement with a written warranty of up to one year. Whether you live in Tayma, Al Waha, Saad Al Abdullah, or Al Naeem, a technician will reach you the same day and restore your washer to full performance as if brand new.
Choosing Toshiba Al Jahra Service Center means choosing quality, safety, and speed—with officially guaranteed service handled by experts who know every detail of Toshiba’s Japanese technology.

Frequently Asked Questions (FAQ)

Q: Is the repair done at home, or do I need to move the washer?
A: All our services are performed entirely at home. The technician brings diagnostic tools and original parts and completes the repair on-site.

Q: How long does the repair take?
A: Most repairs take between 30 to 60 minutes. If a special part is needed, it’s delivered and installed the same day.

Q: Do you provide genuine Toshiba parts?
A: Yes, all parts are 100% original, imported from Toshiba Japan, and come with an official warranty.

Q: Can I schedule maintenance at night or during holidays?
A: Absolutely. Service is available 24/7 across all Al Jahra areas, even on official holidays.

Q: How can I request the service?
A: You can contact us directly via WhatsApp or phone, and the technician will arrive within less than an hour.

Keywords

• Toshiba washing machine repair in Al Jahra
• Toshiba washer technician Kuwait
• Authorized Toshiba Service Center
• Automatic washer maintenance Kuwait
• Toshiba modern washer repair
• Control board inspection
• Deep cleaning cycle service
• Toshiba motor belt replacement
• Lid switch sensor inspection
• Toshiba technician Al Jahra
• Toshiba customer service Kuwait
• Toshiba washer emergency repair
• In-home Toshiba maintenance
• Original Toshiba Japan parts
• Smart Toshiba washer repair
• Digital washer reprogramming
• Certified Toshiba technician in Kuwait
• Official warranty after service