Toshiba Automatic Washing Machine Repair in Al Ahmadi
In the Al Ahmadi area, Toshiba automatic washing machines are among the most widespread appliances in Kuwaiti homes, thanks to their powerful performance and high Japanese quality.
However, even advanced appliances require regular maintenance to preserve their efficiency, especially with daily use and the humid climate that can lead to internal scale buildup or rust.
That’s where the Toshiba washing machine repair technician in Al Ahmadi plays a key role — providing professional home service that includes a full inspection, internal cleaning, electronic and mechanical repairs, and official warranty from the Toshiba Kuwait Maintenance Center.
Maintenance of Modern Energy-Saving Toshiba Washing Machines
Modern energy-efficient Toshiba automatic washing machines have become the first choice for many homes in Al Ahmadi, especially because they combine powerful performance with Japanese technology that saves both electricity and water consumption.
Toshiba has developed a new generation of washers equipped with an Inverter Motor and Eco Sense system, which identifies the amount and type of laundry and accurately calculates the required amount of water.
But like any advanced electronic device, the washer needs precise and regular maintenance to continue operating at full efficiency — especially in Kuwait, where heat and humidity can affect internal components.
Main Features of Toshiba Energy-Saving Washers
• Eco Wash System automatically determines the proper amount of water and detergent.
• Silent Inverter Motor reduces power consumption by up to 40%.
• Anti-Vibration Technology prevents shaking during the spin cycle.
• Quick Wash Function for small loads.
• Digital Display shows temperature and wash duration.
• Smart Sensors adjust water temperature based on fabric type.
These features are excellent — but they rely heavily on accurate programming and properly functioning sensors.
If any of these components fail, issues may arise such as program stoppage, increased water use, or heating failure.
Common Malfunctions in Al Ahmadi
• Washer stops suddenly mid-cycle.
• Weak drum rotation during spin.
• Light water leakage from the washer base.
• Increased power or water consumption.
• Error codes appearing on screen such as E3 or F1.
• Washer fails to heat water even when hot mode is selected.
Possible Causes of Malfunctions
• Accumulated lime deposits inside the drum.
• Fault in load or temperature sensors.
• Repeated power interruptions confusing the control system.
• Damage to the electronic board or inverter motor.
• Partial blockage in the water filter.
Precise Maintenance Steps Performed by the Technician
1. Disconnect power and water to ensure safety.
2. Check the washer’s programming using the Toshiba Smart Tester device.
3. Read stored error codes in the electronic system to identify the cause.
4. Test internal sensors and compare readings with the original factory values.
5. Clean the internal filter and remove any debris.
6. Measure Inverter Motor performance using a Digital Meter.
7. Lubricate internal pulleys if friction or noise is detected.
8. Perform a firmware reset if necessary.
9. Run a trial cycle after maintenance to verify performance.
Tools Used by the Technician
• Toshiba Diagnostic Scanner – for inspecting sensors.
• Digital Multimeter Pro – for voltage and current measurement.
• Eco Sensor Calibrator – to adjust water sensors.
• Toshiba Cleaning Kit – for professional cleaning.
• Thermo Test Tool – to measure real water temperature during operation.
Advantages of Toshiba Technicians in Al Ahmadi
• Certified training from Toshiba Japan.
• Use of original digital diagnostic tools.
• Provide immediate home service with no device transport needed.
• Replace only damaged parts with original Toshiba parts and written warranty.
• Provide a digital maintenance report after every visit showing the cause and solution.
Customer Experiences
“My modern Toshiba washer used to stop mid-cycle for no reason. The technician from Al Ahmadi Center examined it using a small laptop and found that the sensor wasn’t reading the load correctly. He replaced it with an original part, and it worked perfectly.
It’s been two months since the maintenance — now the washer is quieter and consumes less electricity. Excellent and fast service!”
Toshiba Technician Tips to Maintain the Washer
• Use only detergents made for automatic washers.
• Clean the drum every two weeks.
• Avoid overloading the washer.
• Always disconnect power after each wash.
• Don’t use hot water in every cycle, as it weakens sensors over time.
• Let the washer rest between cycles to prevent motor overheating.
Reasons Why Service Is in High Demand in Al Ahmadi
• The humid climate increases the need for frequent cleaning.
• Frequent power cuts affect electronic boards.
• Most homes have multiple washers, making regular maintenance essential.
• Local technicians offer 24-hour emergency service availability.
Technical Aspect
After completing the repair, the technician runs Toshiba Energy Check Mode, which measures electricity consumption in each cycle to ensure the washer has returned to its original energy-saving performance.
This step guarantees that the washer doesn’t just clean clothes — it also operates with maximum efficiency.
Summary
The Toshiba Energy-Saving Washing Machine Maintenance Service in Al Ahmadi includes precise inspection, comprehensive cleaning, and firmware adjustments for the smart system inside the washer.
Certified technicians from Toshiba Kuwait Service Center provide professional home service that guarantees high performance and genuine energy savings in electricity and water — all with official warranty and noticeable results from the very first wash.
Inspection and Repair of Electronic Buttons
The buttons on automatic washing machines, especially in modern Toshiba models, act as the brain that controls all operations—from starting the cycle to selecting the program and temperature. However, due to humidity or frequent use, these buttons may malfunction or respond slowly, especially in coastal areas like Al Ahmadi, where the humidity level is high. That’s when the Toshiba technician in Al Ahmadi comes in, specialized in inspecting and repairing electronic buttons with high precision using original tools and techniques from the parent company.
Symptoms of Button Malfunction
• Buttons do not respond when pressed.
• Error codes such as E4 or U1 appear after attempting to start.
• The washer starts or stops unexpectedly.
• Some buttons work while others don’t.
• The screen flickers or freezes after selecting a program.
Common Causes of Button Problems
• Moisture or steam entering the front panel.
• Dust or detergent residue accumulating around buttons.
• Damage to the Control Panel Board due to electrical short.
• Wear of touch points from strong or frequent pressing.
• Weak electrical current feeding the board.
Steps for Inspection and Repair
1. Disconnect power completely.
2. Open the front cover to access the button panel.
3. Inspect electronic circuits using a Digital Multimeter.
4. Clean touch points with moisture-resistant materials.
5. Replace worn or broken buttons.
6. Check Flex Cable connections between the buttons and the main board.
7. Reassemble the cover and perform an electronic response test.
Tools Used by the Technician
• Contact Cleaner Spray to remove dust and moisture.
• Micro Soldering Kit for repairing fine circuits.
• Toshiba Test Pad to measure each button’s response.
• Digital Diagnostic Device to read board status.
• Anti-Static Wristband to protect the board from static electricity.
Service Features in Al Ahmadi
• Accurate button inspection without full disassembly.
• Replacement with original Toshiba Japan parts.
• Cleaning and disinfecting the panel to prevent recurring issues.
• Fast home service within 60 minutes.
• One-year warranty on new parts.
Customer Experiences
“My washer buttons used to stop working randomly. The technician from Toshiba Al Ahmadi inspected it and said humidity affected the board. He cleaned it, replaced the power button, and now it works like new. I used to press the button several times to start, but after service, it responds with one touch.”
Toshiba Technician Tips to Avoid Button Issues
• Don’t clean the panel with liquids—use a dry cloth only.
• Avoid placing the washer in closed or damp spaces.
• Don’t press buttons too hard, especially power and stop buttons.
• Disconnect electricity after every use to protect the board.
• Clean buttons weekly with a soft cotton swab.
Why This Service Is in High Demand in Al Ahmadi
• Humid weather causes frequent electronic button issues.
• Widespread use of smart washers with touch systems.
• Power cuts often lead to damaged control boards.
• Homeowners need fast, on-site service without disassembly.
Technical Aspect of the Service
Technicians at Toshiba Al Ahmadi use a smart tool called Button Response Analyzer, connected directly to the board and displayed on a tablet. It shows each button’s response percentage in real time. If a specific button gives a weak reading, the technician identifies it instantly and replaces it on the spot—saving repair time dramatically.
Advantages of Toshiba Technicians in Al Ahmadi
• Certified by Toshiba Japan.
• Comprehensive electronic inspection in one visit.
• Written official warranty on parts and service.
• Use of digital diagnostic tools, not traditional methods.
• Free delivery of original spare parts to the customer’s home.
Marketing Value
Repairing electronic buttons doesn’t just restore washer function—it restores full performance and prevents future board damage, saving customers from costly replacements. That’s why many residents of Al Ahmadi now request regular button inspections as part of preventive maintenance plans.
Summary
The Electronic Button Inspection and Repair Service for Toshiba washers in Al Ahmadi ensures precise, responsive controls for all commands. Certified technicians from the Toshiba Kuwait Maintenance Center use advanced diagnostic tools to test, clean, or replace each button with an original part—complete with an official warranty and fast home service.
Cleaning the Internal Filter with Toshiba’s Specialized Solutions
The internal filter in Toshiba automatic washers is one of the most important components for maintaining washing efficiency, as it filters water from debris, detergent residues, and fabric lint. However, most people in Al Ahmadi overlook the importance of regular filter cleaning—leading to slow drainage or unpleasant odors. Therefore, the internal filter cleaning service using Toshiba-approved materials is a key part of professional maintenance provided by certified Toshiba technicians in Kuwait.
Signs of a Clogged Internal Filter
• Delayed water drainage.
• Pump noise louder than usual.
• Bad odor coming from the drain opening.
• Residual water inside the drum after a wash.
• Error codes like E1 or F3 appear on the screen.
Causes of Filter Blockage
• Lint and hair buildup inside the filter.
• Using detergents not meant for automatic washers.
• Long periods without cleaning.
• Small objects like coins or pins entering the system.
• Lime buildup from hard water.
Filter Cleaning Steps by Toshiba Technician in Al Ahmadi
1. Disconnect power and water.
2. Carefully open the lower filter cover with a special key.
3. Drain remaining water manually through the hose.
4. Remove the filter and clean it with a soft brush and warm water.
5. Wash using Toshiba Filter Cleaner solution to dissolve lime deposits.
6. Clean the entire internal drain channel.
7. Dry the filter and reinstall it securely.
8. Run a short test cycle to confirm proper drainage.
Importance of Regular Filter Cleaning
• Maintains quick drainage.
• Prevents bacteria and mold buildup inside the washer.
• Reduces water and energy consumption.
• Prolongs the pump and motor lifespan.
• Improves washing performance noticeably.
Service Features in Al Ahmadi
• Comprehensive filter and drain cleaning.
• Pump and pipe inspection after cleaning.
• Use of original Toshiba-approved cleaning solutions.
• Fast home service in under an hour.
• Detailed service report after maintenance.
Customer Experiences
“My washer wasn’t draining properly. The technician from Toshiba Al Ahmadi opened the filter—it was full of lint and hair. He cleaned it with a special solution, and now it drains quickly. The odor is gone completely, and the service was neat and fast.”
Toshiba Technician Tips After Cleaning
• Check the filter every two weeks, especially with daily use.
• Avoid regular detergent—it leaves heavy residue.
• Run Tub Clean cycle monthly.
• Unplug power after each use.
• Keep the washer area dry and ventilated to prevent moisture.
Why the Service Is in High Demand in Al Ahmadi
• Local water contains high lime content.
• Most homes use washers daily.
• Neglecting filter cleaning causes pump damage.
• Certified technicians provide safe and professional cleaning.
Technical Aspect
Technicians at Toshiba Al Ahmadi use a Water Flow Analyzer to measure drainage speed before and after cleaning. This tool provides accurate readings to confirm that the filter is fully unclogged—ensuring a professional result, not just surface cleaning.
Marketing Value
Cleaning the internal filter with genuine Toshiba products improves washer performance by 25%, prevents costly breakdowns, and ensures long-term reliability. That’s why many Al Ahmadi residents subscribe to Toshiba’s annual maintenance program for continuous cleanliness.
Summary
The Internal Filter Cleaning Service with Toshiba’s specialized materials in Al Ahmadi guarantees fast drainage, stronger performance, and a fresh-clean smell. Certified technicians from the Toshiba Kuwait Service Center perform a thorough cleaning using safe, original materials—along with full inspection of the pump and pipes and an official service warranty.
Toshiba Automatic Washing Machine Repair in Ahmadi
Repairing Water Leakage from the Washer Base
Water leakage from the washer is one of the most annoying problems for residents of Al Ahmadi, especially since the floor can get soaked, causing tile damage or even an electrical short circuit if ignored. Although Toshiba automatic washers are designed with excellent water insulation, leaks can still occur due to minor hose wear, weakened base gasket, or internal drain pump blockage. Certified technicians from the Toshiba Al Ahmadi Center have the expertise and tools to accurately locate and permanently fix the source of leakage without affecting washer performance.
Causes of Water Leakage from the Washer Base
• Cracked or worn drain hose at its connection point.
• Loose metal clamps inside the washer base.
• Blockage in the drain pump causing water to flow backward.
• Worn or damaged lower door gasket.
• Small crack in the inner drum.
• Excess water filling caused by a faulty level sensor.
Leakage Symptoms
• Small puddle under the washer after each wash.
• Dripping sound continues even after stopping the cycle.
• Dampness around the lower edges of the washer.
• Error codes E2 or E9 appear on the display.
• Water seeping from the door during spinning.
Steps Followed by Toshiba Technicians in Al Ahmadi
1. Disconnect electricity and water supply.
2. Lift the washer slightly and inspect the base using a waterproof inspection light.
3. Check internal and external hoses carefully.
4. Open the drain pump and clean out any residue or dirt.
5. Inspect the internal drum for hairline cracks.
6. Replace the gasket or rubber seal if worn.
7. Fill the washer with water and observe for 10 minutes.
8. Reinstall the lower cover securely after confirming the leak has stopped completely.
Types of Leaks Handled by the Technician
• Front door leaks.
• Back hose leaks.
• Drain outlet leaks.
• Overflow during filling.
Service Features in Al Ahmadi
• Accurate detection of the exact leak source.
• Quick on-site repair without moving the unit.
• Original Toshiba Japan replacement parts.
• Six-month warranty on repair.
• Full cleaning after service completion.
Customer Experiences
“My washer had a light leak underneath. The technician from Toshiba Al Ahmadi checked it and said the inner hose was cracked. He replaced it with an original part, and the leak stopped completely. The service was quick, and he even cleaned the area afterward—no water traces left.”
Toshiba Technician Tips to Prevent Leaks
• Inspect the drain hose every three months.
• Do not overfill the washer with extra water beyond program settings.
• Keep the area around the washer dry and ventilated.
• Unplug the washer immediately if you notice any leak.
• Use a voltage stabilizer to protect consistent operation.
Why This Service Is in High Demand in Al Ahmadi
• High salinity and humidity in local water.
• Frequent vibrations during spinning damage gaskets.
• Daily use of washers in large households.
• Ground-level homes affected more by moisture than apartments.
Technical Aspect
Technicians at Toshiba Al Ahmadi use a device called Hydro Pressure Test, which injects low-pressure air into the drain system to detect even invisible leaks. After repairs, they apply a protective anti-corrosion coating to the washer base to maintain long-term waterproofing.
Marketing Value
Repairing leaks doesn’t only save the washer—it protects the entire home from moisture and mold. Toshiba Al Ahmadi’s service is fast, clean, and guaranteed, which is why customers prefer it over regular workshops.
Summary
The Toshiba Washer Water Leak Repair Service in Al Ahmadi ensures fast and professional leak detection and repair using digital diagnostic tools and original parts with official warranty. Certified technicians from the Toshiba Kuwait Service Center provide safe home maintenance that protects both the washer and the house from future water damage.
Replacing the Original Toshiba Water Pump
The water pump (or drain pump) is the heart of Toshiba automatic washers—it’s responsible for drawing and draining water precisely during each cycle. With daily use in Al Ahmadi’s hot and humid climate, the pump is under constant pressure, which can cause wear or clogging over time. That’s why the Original Toshiba Water Pump Replacement Service is among the most requested in the area, ensuring your washer works like new again.
Symptoms of Pump Failure
• Washer doesn’t drain water at all.
• Unusual humming or grinding sound during draining.
• Light burning smell from underneath the washer.
• Water remains in the drum after the cycle.
• Error codes E5 or F9 appear on the display.
Causes of Pump Damage
• Hair, buttons, or coins entering the filter.
• Clogged or twisted drain hose.
• Lime buildup inside the pump impeller.
• Continuous use without resting between cycles.
• Voltage drop or power outage during draining.
Replacement Steps by Toshiba Technicians in Al Ahmadi
1. Disconnect power and water completely.
2. Lift the washer and remove the bottom panel to access the pump.
3. Disconnect all wires and hoses attached to the old pump.
4. Inspect the pump to determine if damage is due to burned coils or blockage.
5. Clean the internal water path thoroughly.
6. Install the Original Toshiba Japan water pump.
7. Tighten the screws using anti-rust bolts and secure all connections.
8. Run a drain test to verify flow rate and performance.
9. Provide the customer with a technical report detailing the old pump’s condition.
Tools and Equipment Used
• Toshiba Pump Replacement Kit
• Digital Flow Tester – to measure water discharge speed.
• Torque Screwdriver – for precise tightening.
• Leak Detector Light – to check for post-install leaks.
• Seal Lubricant – to secure gaskets and prevent corrosion.
Benefits of Using Original Toshiba Pump
• Longer lifespan—up to 5 years.
• Extremely quiet operation.
• High resistance to scale and salty water.
• Full compatibility with all Toshiba models.
• One-year official warranty from the company.
Customer Experiences
“My washer wouldn’t drain at all. The technician from Al Ahmadi Center replaced the pump with an original Toshiba part, and it worked perfectly again. Excellent and fast service—he cleaned everything and installed it with precision.”
Toshiba Technician Tips to Protect the Pump
• Check the filter before each wash cycle.
• Don’t overload the washer.
• Run an internal cleaning cycle every two weeks.
• Avoid regular powder detergent—it leaves heavy residue.
• Unplug the washer when not in use for long periods.
Why the Service Is in High Demand in Al Ahmadi
• High water salinity causes mineral buildup in the pump.
• Daily washer use in large households.
• Frequent summer breakdowns due to heat.
• Demand for long-lasting original spare parts.
Technical Aspect of the Service
Technicians at Toshiba Al Ahmadi use a Smart Pump Analyzer device that measures impeller speed before and after replacement. This test shows customers the precise difference in performance, proving that the new part operates at top efficiency.
Marketing Value
Replacing the original Toshiba water pump is not a temporary fix—it’s an investment in the washer’s lifespan. By installing a genuine part with warranty, customers gain long-term peace of mind and avoid repeated repair costs from uncertified workshops.
Summary
The Original Toshiba Water Pump Replacement Service in Al Ahmadi guarantees stable performance and perfect drainage, using genuine parts and professional installation right at home. Certified technicians from Toshiba Kuwait Service Center ensure safe, quick, and guaranteed repairs that restore the washer to its original efficiency.
Certified Toshiba Technician in Al Ahmadi – 24/7 Emergency and Maintenance Service
In today’s world, the automatic washer has become an essential part of every household in Al Ahmadi. But sometimes, it can suddenly break down at inconvenient times—midnight, before an event, or when laundry piles up. At such times, you don’t want to wait a whole day for service. That’s when the Certified Toshiba Technician in Al Ahmadi steps in, providing 24-hour emergency home service, anytime—even during public holidays.
Features of Toshiba Emergency Service in Al Ahmadi
• Available 24/7, seven days a week.
• Technicians ready to reach any area within 30–60 minutes.
• Complete service including diagnostics, repair, and replacement.
• Service vans fully equipped with tools and original spare parts.
• Fault reports accepted via WhatsApp or direct call.
Common Emergency Issues
• Washer won’t power on.
• Sudden water leak from base.
• Grinding or loud humming sound.
• Error codes E2 or F5 appear.
• Weak drainage or irregular spinning.
• Power loss or blown fuse.
Steps Followed by Certified Technicians
1. Receive the report and record the washer model.
2. Prepare tools and compatible parts before departure.
3. Reach customer site in record time.
4. Conduct full inspection using digital tools.
5. Identify the fault within 10 minutes.
6. Perform repair on the spot—no need to move the washer.
7. Test operation in front of the customer.
8. Provide written warranty for the service and replaced parts.
Tools Used by Technicians
• Toshiba Smart Diagnostic Tool for automatic fault detection.
• Digital Multimeter Pro for voltage and current checks.
• Electronic Leak Detector for hidden leaks.
• Pump Tester Unit for drain and pump tests.
• Firmware Reset Adapter to reprogram digital washers.
Technician Qualifications
• Trained directly by Toshiba Japan on latest models.
• Certified by Toshiba Kuwait Service Center.
• Use only genuine Toshiba spare parts.
• Maintain cleanliness and precision at customer’s home.
• Explain problems clearly and provide preventive advice.
Customer Experiences
“My washer broke at 11 p.m. I called Toshiba Al Ahmadi, and the technician arrived within half an hour. He replaced the temperature sensor and fixed it instantly. Excellent, fast service!”
“I was worried about a strange noise. The technician checked and found a blocked pump, cleaned it right there. Truly professional and helpful service.”
Benefits for Customers
• Peace of mind with round-the-clock support.
• No waiting for appointment or business hours.
• Same-day repair—no delays.
• Time-saving and convenient for families.
• Prevents further damage by addressing faults immediately.
Why This Service Is in High Demand in Al Ahmadi
• High washer dependency in households.
• Salty water causes rust or blockage.
• Power fluctuations during summer damage boards.
• Customers prefer quick professional repairs over workshops.
• Growing demand for nighttime and holiday service.
Technical Aspect
Technicians use Toshiba Remote Sync, connecting the washer to a tablet via USB to read all operational codes instantly. This allows precise diagnostics without disassembling the unit, minimizing repair time and keeping the machine intact. After service, a digital report is issued via email or WhatsApp showing fault details, replaced parts, and warranty info.
Safety Tips from Technicians
• Unplug immediately if you smell burning or notice a leak.
• Don’t touch the washer with wet hands.
• Avoid using during voltage peak hours.
• Call emergency service if an error code persists.
• Keep the washer level to prevent vibration.
Marketing Aspect of 24/7 Service
This service is designed for Kuwait’s fast-paced lifestyle. The Toshiba Certified Technician in Al Ahmadi isn’t just a repairman—he’s a maintenance advisor who helps you understand and protect your appliance. Every visit includes a free full inspection and light internal cleaning. That’s why customers choose Toshiba Centers over regular shops—professionalism and convenience.
Additional Benefits
• 10% discount on first visit for Al Ahmadi residents.
• Online or phone booking available.
• Free phone support for simple error code guidance.
• Service for all models—old, new, and smart.
• Coverage of all residential and industrial areas in Al Ahmadi.
Summary
The Certified Toshiba Technician Emergency Service in Al Ahmadi provides comfort, speed, and reliability all at once. Certified experts from Toshiba Kuwait Maintenance Center use digital diagnostic tools for instant fault detection, fast arrival, and same-visit repair—with written warranty and genuine parts. It’s the best solution for Al Ahmadi residents seeking professional, safe, and immediate washer repair any time of day.
Conclusion
If your Toshiba automatic washer faces any issue—from sudden stoppage to water leakage or weak spinning—the fastest and safest solution is contacting a Certified Toshiba Technician in Al Ahmadi. The service operates 24/7, right at your home, with top-quality digital diagnostic tools and original Japanese parts covered by full warranty. Whether you’re in Mangaf, Fahaheel, or Abu Halifa, technicians are available across Al Ahmadi, providing quick, professional service that ensures your washer runs like new.
In Short:
Choosing Toshiba Washing Machine Repair in Al Ahmadi means choosing expertise, quality, and genuine warranty. Save yourself the hassle of unreliable repairs—let the authorized Toshiba Kuwait technicians handle your appliance and restore it to perfect condition.
FAQ
Q: How long does Toshiba washer maintenance take in Al Ahmadi?
A: Most repairs are completed within one hour during the same visit, unless a special part needs ordering.
Q: Does the technician replace parts at home?
A: Yes, all technicians carry original Toshiba Japan parts and replace them directly at your home—no moving required.
Q: Is there a warranty after maintenance?
A: Absolutely. Every repair or replacement includes an official warranty ranging from 6 months to 1 year.
Q: Is service available at night or during holidays?
A: Yes, 24/7 service is available every day, including weekends and public holidays.
Q: How can I contact the service center?
A: You can reach us via phone or WhatsApp for immediate booking or pricing inquiries.
Keywords
• Toshiba washing machine repair in Al Ahmadi
• Toshiba washer technician Kuwait
• Authorized Toshiba Service Center
• Toshiba automatic washer repair
• Toshiba digital washer diagnostics
• Water pump replacement
• Internal filter cleaning
• Modern Toshiba washer repair
• 24-hour Toshiba emergency service
• Certified Toshiba technician in Al Ahmadi
• Best Toshiba service center Kuwait
• Washer water leak repair
• Washer firmware reprogramming
• Fast home service in Al Ahmadi
• Genuine Toshiba Japan spare parts
• Toshiba smart washer repair
• Full electronic washer inspection
• Official warranty after maintenance
